To improve the reliability of InSb IRFPAs, underfill has usually been filled between InSb chip and Si ROIC. Around the glass\ntransition temperature, underfill shows viscoelasticity, yet, far below it, which shows apparently temperature dependent mechanical\nproperties. Basing on the temperature dependent elastic model of underfill, firstly a small format array of 8 Ã?â?? 8 elements InSb\nIRFPAs is investigated by changing indium bump diameters and heights; simulated results show that the maximum stress in InSb\nchip has nothing to do with underfill height and is dependent on indium bump diameter; the varying tendency is just like the\nhorizontally extended letter U. When indium bump diameter is set to 24 ????m with height 21 ????m, the maximal stress in InSb chip\nreaches minimum. To learn the stress in 64 Ã?â?? 64 elements in short time, with the above optimal structure, InSb IRFPAs array scale\nis doubled once again from 8 Ã?â?? 8 to 64 Ã?â?? 64 elements. Simulation results show that the stress maximum in InSb chip is strongly\ndetermined by arrays format and increases with array scale; yet, the stress maximum in Si ROIC almost keeps constant and is\nindependent on array sizes; besides, the largest stress locates in InSb chip, and the stress distribution in InSb chip is uniform.
Loading....